features guard ring for transient protection low power loss,high efficiency high current capability,low vf high surge capacity mechanical data case: ito-220ac molded plastic polarity: as marked on the body weight: 0.08ounces,2.24 grams mounting position :any dimensions in inches and (millimeters) maximum ratings and electrical characteristics rating at 25 ambient temperature unless otherwise specified. single phase, half wave ,60hz, resistive or inductive load. for capacitive load, derate current by 20% mbrf mbrf mbrf mbrf mbrf mbrf mbrf 1630 1640 1650 1660 1680 16100 16150 maximum recurrent peak reverse voltage v rrm 30 40 50 60 80 100 150 v maximum rms voltage v rms 21 28 35 42 56 70 105 v maximum dc blocking voltage v dc 30 40 50 60 80 100 150 v maximum average forward rectified current ( see fig.1) peak forward surge current 8.3ms single half sine-wave super imposed on rated load (jedec method) peak forward if=16a @t j =25 0.95 voltage (note1) if=16a @t j =125 0.92 maximum dc reverse current @t j =25 0.1 at rated dc bolcking voltage @t j =125 5 typical junction capacitance (note2) c j pf typical thermal resistance (note3) r jc /w operating temperature range t j storage temperature range t stg 4.the typical data above is for reference only( ?). rev. 7, 16-mar-2017 schottky barrier rectifiers mbrf1630 thru mbrf16150 3.thermal resistance junction to case. -55 to +175 reverse voltage - 30 to 150 volts forward current - 16.0 amperes notes:1.300us pulse width,2% duty cycle. plastic package has ul flammability classification 94v-0 metal of silicon rectifier , majority carrier conduction for use in low voltage,high frequency inverters,free 0.75 a i (av) 16.0 a 150 0.85 0.63 v f ma i r 0.3 7.5 0.5 15 0.5 10 -55 to +150 wheeling,and polarity protection applications characteristics symbol unit i fsm 2.measured at 1.0 mh z and applied reverse voltage of 4.0v dc. 500 3.0 v 0.57 0.65 0.75 ito-220ac .020(0.50) .031(0.80) .028(0.70) .020(0.50) .102(2.6) .118(3.0) .583(14.8) .622(15.8) .122(3.1) .138(3.5) .551(14.0) .511(13.0) .043(1.1) .059(1.5) .098(2.5) .114(2.9) .173(4.4) .189(4.8) .102(2.6) .118(3.0) .406(10.3) .386(9.8) .105(2.67) .095(2.41) .157(4.0) .118(3.0) .04 max (1.0)
rating and charactertic curves mbrf1630 thru mbrf16150 the cruve graph is for reference only, can't be the basis for judgment( ?)! rev. 7, 16-mar-2017 number of cycles at 60hz fig. 2 ? maximum non-repetitive surge current peak forward surge current, amperes 1 250 200 150 100 50 0 300 10 25 20 50 100 pulse width 8.3 ms single half-sine-wave (jedec method) capacitance, (pf) fig.5 ? typical junction capacitance 0.1 1000 100 10 1 10 100 t j = 25c f = 1 mhz 4 fig. 1 ? forward current derating curve case temperature ( ) a verage forward current amperes 4.0 0 25 12.0 16.0 50 75 100 125 150 175 8.0 single phase half wave 60hz resistive or inductive load 4020 0.1 1.0 1000 10 0.01 0 100 instantaneous forward voltage,volts fig.4-typical forward characteristics instantaneous forward current, (a) 0 0.1 0.3 0.5 0.7 1.1 1.51.3 0.9 1.7 100 10 0.1 1.0 t j = 25c pulse width 300us 2% duty cycle mbrf1650 - mbrf1660 mbrf1680 - mbrf16100 mbrf16150 mbrf1630 - mbrf1640 instantaneous reverse current(ma) percent of rated peak reverse voltage,(%) fig.3-typical reverse characteristics t j =125 t j =25 mbrf1630 - mbrf1660 mbrf1680 - mbrf16150 60 80 100 120 140 4020 0.1 1.0 1000 10 0.01 0 100 reverse voltage ,volts
legal disclaimer notice all specifications and data are subject to be changed without notice to improve reliability function or design or other reasons. hy makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the co- tinuing production of any product. to the maximum extent permitted by applicable law, hy disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,consequential or incidental d- amages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merch- antability. statements regarding the suitability of products for certain types of applications are based on hy?s knowledge of typical require- ments that are often placed on hy products in generic applications. such statements are not binding statements about the suitabi- lity of products for a particular application. it is the customer?s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application.parameters provided in datasheets and specific- ations may vary in different applications and performance may vary over time. all operating parameters, including typical paramet- ers, must be validated for each customer application by the customer?s technical experts. product specifications do not expand or otherwise modify hy?s terms and conditions of purchase, including but not limited to the warranty expressed therein. except as expressly indicated in writing, hy products are not designed for use in medical, life-saving, or life-sustaining applicati- ons or for any other applications in which the failure of the hy product could result in personal injury or death. customers using or selling hy products not expressly indicated for use in such applications do so at their own risk.please contact authorized hy pers- onnel to obtain written terms and conditions regarding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of hy. product names and markings noted herein may be trademarks of their respective owners. ?????????? hy ???????????hy (i) ? ??????(ii) ???????(iii) ??? ???????? ????? hy ? hy ???????????? ???????????????? ????? ????????????? ??? hy ???? hy ???? ?hy ????? hy ??????? ?????? hy ????????hy ?? ? ? hy ??????????????????? ??? rev. 2, 16-mar-2017 disclaimer
|
